 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| LTR C REVISION DATE 12-13-05 APPD RM CHIP MATERIAL InGaN LENS COLOR WATER CLEAR EMISSION COLOR WARM WHITE Notes: 1. 2. 3. 4. 5. 6. ALL DIMS ARE IN MILLIMETERS (INCHES). TOLERANCE IS 0.25mm (.010") UNLESS OTHERWISE SPECIFIED. PROTRUDED RESIN UNDER FLANGE IS 1.0mm (.04") MAX. LEAD SPACING IS MEASURED WHERE LEADS EMERGE FROM THE PACKAGE. LEADS TO BE SOLDERABLE AND CAPABLE OF MEETING THE SOLDERABILITY REQUIREMENTS OF MIL-STD-202, METHOD 208. MANUFACTURE DATE SHALL NOT BE OLDER THAN 26 WEEKS (6 MONTHS). -PROPRIETARYR ATTENTION OBSERVE PRECAUTIONS FOR HANDLING- ELECTROSTATIC SENSITIVE DEVICES This document contains Proprietary TM LEDTRONICS, INC. information of It may not be copied, used or disclosed for any purpose without the prior express TM LEDTRONICS, INC. written consent of TM TITLE DWG NO DSDC302 CODE IDENT NO. 8Z410 DWG BY RM L200-0WW-20D SCALE 2:1 CHK BY PL 12-16-05 QA GZ 12-16-05 SHEET 1 OF 3 MNFG DATE 11-23-05 CUSTOMER .XXX .010 23105 KASHIWA COURT TORRANCE, CA 90505 .XX .025 ANGLES 0,30' FRACT. 1/32 TOLERANCE PER ANSI-Y14.5 (UNLESS OTHERWISE STATED) LTR C REVISION DATE 12-13-05 APPD RM Absolute Maximum Ratings at Ta 25C Param eter Power Dissipation Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width Continuous Forward Current Derating Linear From 50C Reverse Voltage Electrostatic Discharge (ESD) Operating Temperature Range Storage Temperature Range Lead Soldering Temp erature [4mm (.157 ) From Body] MAX. 80 100 20 0.4 5 150 -20C to +80C -30C to +100C 260C for 5 Seconds Unit mW mA mA mA/C V V Electrical Optical Characteristics at Param eter Luminous Intensity Ta=25C Typ. 7500 17 3.5 --.13 1.67 28673 Max. --22 4.0 50 ------Unit m cd Deg V uA ----uW/sr Test Condition If =20mA (Note 1) (Note 2) If=20mA VR=5V ------- Symbol Iv 2 1/2 Min. --12 2.8 --------- Vi ewing Angle Forward V oltage Reverse Current SCP Lumens Radiant Intensity Vf IR ------- Color Rank BIN C BIN D Notes: Lower Left x y 0.27 0.29 0.29 0.32 Bin Lim i ts (CIE1931 x, y coordinates) Lower Right Upper Right x x y y 0.29 0.26 0.26 0.23 0.32 0.30 0.29 0.26 Upper Left x y 0.25 0.25 0.27 0.29 1 Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve. 2. 1/2 is the off-axis at which the luminous intensity is half the axial luminous intensity. 3. Forward voltage measurement allowance is 0.1V 4. Luminous intensity measurement allowance is 10% -PROPRIETARYR This document contains Proprietary TM LEDTRONICS, INC. information of It may not be copied, used or disclosed for any purpose without the prior express TM LEDTRONICS, INC. written consent of TM TITLE DWG NO DSDC302-A CODE IDENT NO. 8Z410 DWG BY RM L200-0WW-20D SCALE NTS CHK BY QA SHEET 2 OF 3 MNFG DATE 11-23-05 CUSTOMER .XXX .010 23105 KASHIWA COURT TORRANCE, CA 90505 .XX .025 ANGLES 0,30' FRACT. 1/32 TOLERANCE PER ANSI-Y14.5 (UNLESS OTHERWISE STATED) LTR REVISION DATE 12-13-05 APPD RM Typical Electrical / Optical Characteristics Curves (25C Ambient Temperature Unless Otherwise Noted) C Spectral Radiance 10 08 CIE 1931 Chromaticity Diagram 0.40 0.35 Normalized Response 06 04 02 Y 0.30 D 00 3 80 420 460 5 00 540 580 6 20 660 700 7 40 780 0.25 0.20 0.15 0.15 C Wavelength (nm) 0.20 0.25 0.30 0.35 0.40 Forward Current If (mA) Forward Current vs. Forward voltage 30 25 X Relative Luminous Intensity vs. Forward Current Relative Intensity (LOP@20mA=1) 2 20 15 10 5 1 0 2.5 2 .75 3.0 3.25 3.5 3.75 Forward Voltage Vf (V) 0 0 5 0 15 20 25 30 35 Forward Current vs. Derating curve 60 Forward Current If (mA) Forward Current vs. Chromaticity Coordinates 0.28 1mA Ta = 25C Forward Current If (mA) 50 40 30 20 10 0.27 5mA 0 10mA 0 10 20 30 40 50 60 70 80 90 y 0.26 20mA 30mA Derating Curve Ta (C) Beam Pattern 0 -30 30 0.25 40mA 0.24 0.25 0.26 0.27 0.28 0.29 -60 60 x -90 90 1.0 0.8 0.6 0.4 0.2 0.2 0.4 0.6 0.8 1.0 Relative Intensity (LO P@M AX=1) -PROPRIETARYR This document contains Proprietary TM LEDTRONICS, INC. information of It may not be copied, used or disclosed for any purpose without the prior express TM LEDTRONICS, INC. written consent of TM TITLE DWG NO DSDC302-B CODE IDENT NO. 8Z410 DWG BY RM L200-0WW-20D SCALE NTS CHK BY QA SHEET 3 OF 3 MNFG DATE 11-23-05 CUSTOMER .XXX .010 23105 KASHIWA COURT TORRANCE, CA 90505 .XX .025 ANGLES 0,30' FRACT. 1/32 TOLERANCE PER ANSI-Y14.5 (UNLESS OTHERWISE STATED) |
Price & Availability of L200-0WW-20D
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |